Maintain a pH level within an ideal range of 7.2-7.6. If the level is outside this range
Maintain bromine levels in spas of between 3-5mg/l. Freshly filled spas require initial shock or start up dose of 50mg/l for 1 hour or 20mg/l for 2 hours.
This product may be applied directly to spas where temperatures exceed 20 Degrees Celcius. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 1l in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned ‘on’.
Repeat as necessary to achieve levels above.
We recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination.
Please refer to packaging or MSDS
MSDS can be requested from
|Component||SDIC infused with Bromide|